Calpeda GQRM 10-18 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10-18 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQRM 10-20 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10-20 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQRM 10 32-10 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10 32-10 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQRM 10 32-12 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10 32-12 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQRM 10 32-14 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10 32-14 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQRM 10 32-16 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10 32-16 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQRM 10 32-18 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10 32-18 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQRM 10 32-20 single-phase submersible electric pump for drainage without float switch

Calpeda GQRM 10 32-20 single-phase submersible electric pump for drainage without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQS 50-8 three-phase submersible pump for dirty water without float switch

Calpeda GQS 50-8 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQS 50-9 three-phase submersible pump for dirty water without float switch

Calpeda GQS 50-9 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQS 50-11 three-phase submersible pump for dirty water without float switch

Calpeda GQS 50-11 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQS 50-13 three-phase submersible pump for dirty water without float switch

Calpeda GQS 50-13 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQS 50-15 three-phase submersible pump for dirty water without float switch

Calpeda GQS 50-15 three-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQSM 50-8 single-phase submersible pump for dirty water without float switch

Calpeda GQSM 50-8 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQSM 50-9 single-phase submersible pump for dirty water without float switch

Calpeda GQSM 50-9 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQSM 50-11 single-phase submersible pump for dirty water without float switch

Calpeda GQSM 50-11 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQSM 50-13 single-phase submersible pump for dirty water without float switch

Calpeda GQSM 50-13 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda GQSM 50-15 single-phase submersible pump for dirty water without float switch

Calpeda GQSM 50-15 single-phase submersible pump for dirty water without float switch is equipped with a vent valve that allows air to escape around the impeller and ensures safe priming of the pump even after long periods of inactivity.  Back impeller (vortex), particularly suitable for the passage of solids up to ø 50 mm. Easy inspection of the condenser. Cable tie against accidental cable extension. Pump body and impeller with epoxy cataphoresis treatment and external painting for better protection against rust.

Buy Details

Add to basket View details  

Calpeda MPS 303 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 303 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 304 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 304 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 305 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 305 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 306 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 306 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 307 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 307 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 503 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 503 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 504 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 504 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 505 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 505 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 506 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 506 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPS 507 5" three-phase submersible multistage electric pump for clean water

Calpeda MPS 507 5" three-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 303 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 303 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 303-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 303-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 304-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 304-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 305-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 305-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 306-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 306-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 307-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 307-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 503-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 503-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 504-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 504-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 505-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 505-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 506-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 506-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 507-CG 5" single-phase submersible multistage electric pump for clean water with float switch

Calpeda MPSM 507-CG 5" single-phase submersible multistage electric pump for clean water with float switch allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 304 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 304 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 305 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 305 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 306 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 306 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 307 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 307 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 503 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 503 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 504 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 504 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 505 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 505 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 506 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 506 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda MPSM 507 5" single-phase submersible multistage electric pump for clean water

Calpeda MPSM 507 5" single-phase submersible multistage electric pump for clean water allows the inspection of the condenser without disassembling the pump, through the delivery body. The execution of the hydraulic parts, the water jacket around the motor and the submersible pump ensure silent operation. The double seal on the shaft with oil chamber in-between ensures the separation of the motor from the water and additional protection against accidental dry running. The shocks caused by water hammer or valve closure are fully supported by the condenser cover which discharges the stresses on special support, made on the steel jacket, without burdening the plastic hydraulics.

Buy Details

Add to basket View details  

Calpeda 4SDF 16/9EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 16/9EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 22/4EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 22/4EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 22/7EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 22/7EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 22/10EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 22/10EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 22/14EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 22/14EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 22/21EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 22/21EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 22/28EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 22/28EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 22/57EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 22/57EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 36/4EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 36/4EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 36/6EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 36/6EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 36/8EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 36/8EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 36/11EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 36/11EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 36/17EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 36/17EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 36/34EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 36/34EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/5EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/5EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/7EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/7EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/10EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/10EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/15EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/15EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/21EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/21EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/31EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/31EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/42EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/42EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 46/55EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 46/55EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 54/5EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 54/5EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details  

Calpeda 4SDF 54/7EC submersible electric pump for 4" wells with CALPEDA three-phase motor

Calpeda 4SDF 54/7EC submersible electric pump for 4" wells with CALPEDA three-phase motor is designed for inverter operation. Check valve incorporated in the delivery body.

Buy Details

Add to basket View details